TAPE SEAL PTFE 1X520

MEGALOCK 4OZ THREAD SEALANT #158

Hercules? Megaloc? is a multi-purpose thread sealant made with DuPont? Kevlar? for use on metals, including steel, stainless steel, brass, copper, aluminum and plastics. Megaloc? wipes clean from hands and tools with a dry rag, is odor-free, grit-free and will not separate or settle. Megaloc? does not harden, crack or become brittle rather the joints can be disassembled without damage to pipe, fittings or threads years after the joint was made. Megaloc? is applied easily with a natural bristle brush even at temperatures as low as -25 deg F and performs over a temperature range of -50 to 400 deg F. It provides leak-proof hydraulic resistance to 12,000 psi and withstands gas pressure up to 2600 psi. Megaloc? is non-toxic, non-hazardous and non-flammable and contains no lead, heavy metals or volatile solvents.

Ideal for use on natural surface materials found in sinks, countertops, strainers and shower bases. Remains flexible, so it is easy to work with and cleans up easily.

Ptfe thread seal tape blue spool - bulk - 1/2 inch x 260 inches 0.4 density, 0.003 inches thick. Over 50% elongation and chemically inert.

GREASE FAUCET-VALVE 1OZ
Resists high temperature, waterproof ; Apply to stems of faucets, valves, ballcocks, plungers, and washers ; Prevents rust ; Use on hot water or steam to 350?

For use on plumbing threads to prevent leaking.

0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxicand non-flammable. Meets Federal Specification T-27730A.

Lubricates and seals all threaded joints. White. Non-hardening, non-separating, non-toxic paste. Withstands up to 3000 psi on gases from -50 to 400 deg F and 10,000 psi on liquids from -50 to 500 deg F. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel or copper. NSF and IAPMO listed. Brush included.

Manufactured especially for natural gas, propane, butane, water, oil and chemical lines. Heavier than white tape with density of 1.35 to 1.5 g/cu-cm and 4 mil thick. Complies with MIL-T-22230A (ASG), UL 31 RO, AGA 3226 and CAN/ULC-S642. Spool - dispenser box.

GAS LEAK DETECTOR 2OZ